CP5340. Gas-oil level transmitter

Diameter : 22mm - up to 200 meters deep
  x English     x français     x 中文  

Gas-oil level measurement, control and process for motor and domestic gas oil tank. The level measurement is performed through the differential pressure measurement between liquid surface and the submersible sensor. The pressure is converted into electric signal by piezo-electric gauge to provide a 4/20mA output signal on 2 wires.


- Full-scale (F.S.) between 0.5 m to 200m for density 0.84. (Full-scale 20mA adjusted to the required value by Hitec)
- Equivalent pressure : 0.04 to 16 bar.

Mechanical specifications

- Stainless steel 316L housing, and polyamide.
- Diameter : 22mm, height: 180 mm, weight: 170 g without cable.
- Fitting by the suspension cable supplied with a hanging system KITCAB.
- Supplied normally with 5 meters of polyurethane shielded cable and internal tube or more upon request.

Electronical specifications

- Piezo-resistive gauge with stainless steel 316L diaphragm.
- 4/20mA output signal on 2-wire loop.
- Non linearity : 0,2 % F.S. , hysteresis : 0,1 % F.S..
- Voltage supply between 6 to 38VDC.
- Fitted with lightning protector PSE30V in waterproof box.

Using instructions

Submersible transmitter fitted in 5 minutes by hanging the cable with KITCAB system. Connection through the lightning protector PSE30V in waterproof box with air pressure adjustement.


A comment, a question ? Please write to us.

webmaster (at) hitec.fr - © Hitec 2010 - SPIP - Espace privé