CP5250. Pluggable pressure transmitter

10 bars IP68 max - 3/8’’ connector
  x English     x français     x 中文  
 

Measurement, control and process of hydraulic or pneumatic pressure on pipe. The pressure measurement is performed through the differential pressure between atmospheric pressure and liquid pressure. The pressure is converted into electric signal by piezo-electric gauge to provide a 4/20mA output signal on 2 wires.

Range

- Full-scale (F.S.) between 0.05 bar to 50 bars.
- Standard range : 1.0 - 2.0 - 4.0 - 6.0 - 10 - 12 - 16 - 20 - 25 bars.
- Equivalent water height : 0.5 to 500 meters.

Mechanical specifications

- Nickelled brass housing, PVC tip.
- Stainless steel 316L G 3/8’’ BSPC pressure connector.
- Diameter tube : 24mm, overall 27.5mm, height: 155 mm, weight: 260 g without cable.
- Supplied normally with 2 meters of shielded cable and internal tube or more upon request.

Electronical specifications

- Piezo-resistive gauge with silicone coating.
- 4/20mA output signal on 2-wire loop.
- Non linearity : 0,15 % F.S. , hysteresis : 0,1 % F.S..
- Voltage supply between 6 to 38VDC.
- Fitted with lightning protector PSE30V in waterproof box.

Using instructions

Transmitter screwed on female 3/8’’. Connection through the lightning protector PSE30V in waterproof box with air pressure adjustement.


Data-Sheet-pressure-transmitter-CP5250



A comment, a question ? Please write to us.





webmaster (at) hitec.fr - © Hitec 2010 - SPIP - Espace privé