CP5080. Differential pressure transmitter

2 bars max - quick system connectors 6mm
  x English     x français     x 中文  
 

Differential pressure measurement on pipes, filter filled control, filling of filters, etc.. The pressure transmitter is fitted with 2 quick system connectors for 6mm polyamide tube. The pressure is converted into electric signal by piezo-electric gauge to provide a 4/20mA output signal on 2 wires.

Range

- Full scale between 100mbar diff (min) to 3 bars diff (max).
- Standard range : 0.5 bar, 1 bar, 2 bars (differential pressure).
- Maximum absolute Pressure : 10 bars (common mode).

Mechanical specifications

- Nickelled brass housing (high phosphorus percentage).
- 2 quick system connectors for Ø 6mm polyamide tube.
- Diameter tube : 24mm, head: 29mm, overall :43mm.
- Supplied normally with 2 meters of shielded cable (100g) (more upon request).

Electronical specifications

- Piezo-resistive gauge.
- 4/20mA output signal on 2-wire loop.
- Non-linearity : 0.25% F.S., hysteresis : 0.15% F.S..
- Broad operating range between 6 to 27Vdc.
- Fitted with lightning protector PSE30V in waterproof box.

Using instructions

Differential pressure transmitter without any complementary adjustement (Signal adjusted definitively by Hitec). You connect the pressure in the same time on the two connectors, by respecting the polarities indicated on the connections.


Data-Sheet-pressure-transmitter-CP5080



A comment, a question ? Please write to us.





webmaster (at) hitec.fr - © Hitec 2010 - SPIP - Espace privé