CP5215. Extra-thin submersible level transmitter for narrow wells

Diameter : 15mm - up to 100 meters deep
  x English     x français     x 中文  

Water level measurement, control and process for very narrow wells with a very narrow diameter housing of 15mm. Model available only upon specifical request.

The level measurement is performed through the differential pressure measurement between liquid surface and the submersible sensor. The pressure is converted into electric signal by piezo-electric gauge to provide a 4/20mA output signal on 2 wires.


- Full-scale (F.S.) between 10m to 300m. (Full-scale 20mA adjusted to the required value by Hitec).
- Equivalent pressure : 1 bar to 30 bars.

Mechanical specifications

- PVC / Sheated brass.
- Diameter : 15mm, height: 145 mm, weight: 100 g without cable.
- Fitting by the suspension cable supplied with a hanging system KITCAB.
- Supplied normally with 10 meters of shielded cable and internal tube or more upon request.

Electronical specifications

- Piezo-resistive gauge with silicone coating.
- 4/20mA output signal on 2-wire loop.
- Non linearity : 0,15 % F.S. , hysteresis : 0,1 % F.S..
- Voltage supply between 6 to 38 VDC.
- Fitted with lightning protector PSE30V in waterproof box.

Using instructions

Submersible transmitter fitted in 5 minutes by hanging the cable with KITCAB system. Connection through the lightning protector PSE30V in waterproof box with air pressure adjustement.


A comment, a question ? Please write to us.

webmaster (at) hitec.fr - © Hitec 2010 - SPIP - Espace privé