Water level measurement, control and process for sewage, waste water, river and canal, specially with its PTFE anti-adherent coating and large membrane. The level measurement is performed through the differential pressure measurement between liquid surface and the submersible sensor. The pressure is converted into electric signal by piezo-electric gauge to provide a 4/20mA output signal on 2 wires.
Full-scale (F.S.) between 0.5 m to 300m. (Full-scale 20mA adjusted to the required value by Hitec).
Equivalent pressure: 0.05 bar to 30 bars.
Metal tube with PTFE coating and PTFE head cap.
Diameter : 30mm, height: 160 mm, weight: 370 g without cable.
Fitting by the suspension cable supplied with a hanging system KITCAB.
Supplied normally with 10 meters of shielded cable and internal tube or more upon request.
Piezo-resistive gauge with silicone coating.
4/20mA output signal on 2-wire loop.
Non linearity : 0,15 % F.S. , hysteresis : 0,1 % F.S..
Voltage supply between 6 to 38VDC.
Fitted with lightning protector PSE30V in waterproof box.
Submersible transmitter fitted in 5 minutes by hanging the cable with KITCAB system. Connection through the lightning protector PSE30V in waterproof box with air pressure adjustement.